SSA
Contact
SSA
SSA
Professional training

Dangerous Goods Transport: IATA DGR Rules and Classes

Dangerous goods transport is the most tightly controlled part of logistics. One wrong label or one incomplete document can leave a shipment stuck at the airport, sent back, or refused outright. That is why anyone who handles this work needs to know the rules first and touch the cargo second.

9 November 20266 min read7 sections · 5 questions
Dangerous Goods Transport: IATA DGR Rules and ClassesCorporate trainingSingapore Skills Academy

01What dangerous goods transport is and what IATA DGR governs

Dangerous goods are any substance or article that can put people, equipment or the environment at risk during transport. Here is the key point: the risk has nothing to do with the value or the volume of the shipment — it depends on the chemical and physical properties of the goods. A small bottle of cleaning fluid and a tonne of fertiliser go through exactly the same classification logic.

In air transport, this order is set by the IATA Dangerous Goods Regulations (DGR). The manual walks you through the stages in sequence: classification, packing, marking and labelling, documentation and acceptance. New editions are issued regularly, so anyone doing this work in practice has to rely on the edition currently in force, not on a note printed out years ago.

There is one more layer. Airlines and states can add their own requirements, known as variations. In other words, a shipment can be fully correct under the DGR and still be refused by a particular carrier. Failing to check this in advance is the single most repeated mistake in the field.

02The nine classes: where your shipment belongs

Dangerous goods are divided into nine classes. Getting the class right is the foundation of everything that follows: the packing instruction, the label and the paperwork are all chosen afterwards. The table below pairs each class with examples you actually meet in daily work — usually the clearest format for warehouse staff.

ClassShort nameExample seen in practice
1ExplosivesFireworks, ammunition, blasting devices
2GasesAerosol cans, propane, medical oxygen
3Flammable liquidsPaint, varnish, solvents, alcohol-based perfume
4Flammable solidsMatches, certain metal powders
5Oxidisers and organic peroxidesHydrogen peroxide, some fertilisers
6Toxic and infectious substancesPesticides, laboratory samples
7Radioactive materialMedical isotopes, sources in measuring instruments
8CorrosivesBattery acid, strong chemical cleaners
9Miscellaneous dangerous substances and articlesLithium batteries, dry ice, magnetised material

Pay particular attention to Class 9. Most people treat it casually, as "everything else" — yet in everyday operations this is precisely the class that causes the most trouble.

03Who needs dangerous goods training

In practice the rule is simple: whichever link of the chain a person works in, they need to know the requirements that apply to their own stage. This training is not "just for drivers" or "just for the customs declarant".

  • The shipper's side — classifies the goods, packs them, applies marks and labels, and completes the declaration.
  • Freight forwarder and logistics manager — accepts the documents, checks the carrier's requirements, and plans the route.
  • Warehouse and cargo acceptance staff — check the condition of the packaging, the labels, and whether items may be carried together at all.
  • HSE specialist — sets the course of action for a spill or damaged packaging, and investigates incidents.
  • Manager and internal auditor — answers for the process being documented and for staff competence.

Even if a company ships dangerous goods only once or twice a year, the responsible employee still has to be trained. "It rarely happens" does not reduce errors — it increases them, because the habit is simply never built. The same logic applies in occupational health and safety.

04Documents and packaging: where errors come from

Experience says the problem is rarely chemistry — it is procedure. The goods are right but the name is written wrong; the packaging is sturdy but it does not match the instruction; the label is there but the old one underneath was never covered. Reading the list below out loud once before dispatch sounds basic, but it works remarkably well.

Pre-shipment check list:

  • Have the proper shipping name and the UN number been identified correctly?
  • Do the packaging type and quantity match the packing instruction in force?
  • Can the inner packaging shift, and is there absorbent material in case a receptacle breaks?
  • Are the labels and marks complete, and have old, irrelevant labels been removed?
  • Do the quantity, number of packages and class on the document match the table data?
  • Have the additional requirements of the carrier and the state been checked?
  • Is the emergency contact and course of action clear?
  • If damaged packaging is found, who makes the decision — has a responsible person been named?

This list does not belong on the wall; it belongs in the process. The person who formalises the shipment should go through these points every time, before signing.

05Lithium batteries — the case that needs separate attention

Lithium batteries now turn up in almost any shipment: laptops, phones, power banks, wireless earbuds, e-scooters, medical and measuring instruments. That is why they generate more questions in a logistics department than any other topic.

The practical distinctions matter: is the battery contained in the equipment, packed with the equipment, or shipped on its own? The requirements differ in each case. Damaged batteries, returns and batteries being sent for recycling fall under an entirely separate regime.

The most dangerous mistake is declaring a battery as "ordinary goods". This is usually not bad faith but a gap in knowledge: the client says "it's just a power bank", and the manager does not check. So it is worth teaching client-facing staff a few simple clarifying questions too: is the device shipped with its power source, is the battery packed separately, and does the packaging protect against short circuit?

06How to train your staff: a practical plan

Dangerous goods knowledge is not something you read once and file away. It has two parts: understanding the rule, and applying the rule under pressure. Only practice delivers the second.

  1. Define the roles. Who classifies, who signs the documents, who accepts the cargo — put the list on paper.
  2. Test the current level. Give each role ten practical questions: the results show who needs full training and who needs only a short refresher.
  3. Train on your own shipments. Not generic examples — practice on the goods your company actually sends gives the fastest results.
  4. Rehearse the emergency. A spill or damaged-package scenario can be played out in a safe environment; 3D simulation training fits well here, so mistakes happen in the simulator rather than on real cargo.
  5. Learn from every incident. Each held or returned shipment is data pointing at a hole in the process. A system for recording and analysing it comes from incident management.
  6. Keep the knowledge current. Rules change and staff move on — put refresher training in the calendar and re-check the requirements in force every time.

07Dangerous goods training at Singapore Skills Academy in Tashkent

Singapore Skills Academy runs Transport of Dangerous Goods (IATA DGR) training for logistics staff: classification, packing and carriage under international rules are covered through hands-on exercises.

The training is delivered offline, in corporate groups, and ends with a certificate. The programme and schedule are proposed to match your company's needs — which means the sessions can be brought close to your own cargo types and your own process.

If you are building safety work systematically, this training pairs well with other programmes: occupational health and safety, incident management and integrated management systems. You can see all the directions on the professional education and corporate training page.

Summary

In dangerous goods transport the cost of a mistake is very high, while the cost of preparation is a few days of practical training. Book a free consultation to find out which programme fits your company: we will look at your needs and propose a suitable training and schedule.

Frequently asked questions

Who needs dangerous goods training?+

Every responsible employee in the cargo chain: the shipper's side, the freight forwarder and logistics manager, warehouse staff and the HSE specialist. Each person needs to know the requirements for their own stage, because errors most often appear in the gaps between stages.

What does the IATA DGR course cover?+

Classification of dangerous goods, packing, and the rules for carriage under international regulations. The programme is practice-oriented: staff learn the sequence of assigning goods to a class, checking packaging and labelling requirements, and completing the documentation correctly.

Are lithium batteries considered dangerous goods?+

Yes, lithium batteries fall under Class 9 and are one of the cases that raise the most questions. Requirements differ depending on whether the battery is contained in the equipment, packed with it, or shipped separately, and damaged batteries fall under a separate regime.

Is a certificate issued at the end of the training?+

Yes, every training at Singapore Skills Academy ends with a certificate. The training is based on international standards.

What format is the training delivered in?+

The training is delivered offline, in corporate groups. The programme and schedule are proposed to suit your company's needs and processes.

Free consultation

Still have questions?

Leave your name and phone — we'll call you back.

Please enter your name and full phone number.

Thank you! We will contact you soon.

Or call us: +998 94 552 10 09

A lesson at Singapore Skills Academy

Comments

No comments yet — be the first to share your thoughts.

Rate the article:

Rate the academy: Google Yandex

More articles